4.
RTR-5W Clock Settings
If the clock settings for the RTR-5W are not set correctly, the clock in the Web Viewer and
the time of Warnings will also be incorrect. Please make sure to set correctly before
beginning to use.
Clock settings can be made directly using RTR-5W for Windows software, but if RTR-5W
is rebooted, the clock settings will be initialized. However, by making settings to enable the
SNTP server, it is possible to have the clock automatically reset to the current time upon
rebooting.
Ex) Making SNTP Settings
1. Open the
Network Settings Utility
, click on the "Detailed Network Settings" tab,
and gather the current settings.
2. Click the [Change Settings] button and the "Detailed Network Settings" window
will appear, where you can make changes to the settings.
3. Under [SNTP Settings], click “ON” to change the setting.
SNTP Settings
4. After making the settings, enter the info for the recipient of the settings and
click the [Send Settings] button.
5. A message will appear asking you if it is OK to restart the system. Click the [Yes]
button to restart.
6.After the restarting has been completed, the settings will have been
successfully made.
5.
Remote Registration
1. Create a Location
1. Open
RTR-5W for Windows
.
2. In the "Registration / Administration" Menu, click on [Create Location (RTR-5W)]
to display a window where you can enter a name for the new Location.
Enter the Location
Name
[OK]
button
* In the Location name, you cannot use a space, or any of the following characters [\/:,;*?"<>|&].
3. After entering the Location Name, by clicking the [OK] button, the Location will
be created in the Administration Tree.
Administration
Tree
Location Icon
4. Click on the desired Location Icon. In the "Registration / Administration" Menu,
select "Location (RTR-5W) Properties" and enter the same IP address that you
previously entered when making settings in the Network Settings Utility. When
using the network default settings, enter the IP address and Domain that was
assigned.
* By right clicking on the Location icon, a popup menu will appear where you can select
"Location(RTR-5W) Properties" to display the properties window.
*If necessary, make settings in the "Browser Display Settings" section of the Properties Window.
-
Making access possible from a browser
It is possible to make permit / forbid access from a browser.
-
Data Gathering Intervals for Data Transfer Graph <Selections: deactivate, 15, 20, 30
minutes, 1, 2, 3, 6, 12, 24 hours>
This setting is for the intervals for gathering data when monitoring the current readings via the browser and
viewing in simple graph form.
5.
After making entries, click the [Set] button to send the settings to the RTR-5W that was
entered into the "Access Settings" Bar and settings for the Location will be completed.
2. Creating Groups
1. In the "Registration / Administration" Menu, click on "Create Group" to display
a window where you can enter a name for the new Group.
* In the Group name, you cannot use a space, or any of the following characters [\ /:,;*?"<>|&]
(Up to 8 characters can be entered.)
Enter a Group Name
[OK]
button
2. After entering the Group Name, by clicking the [OK] button, the Group will be
created in the Administration Tree.
Administration
Tree
Group icon
3. Click on the desired Group Icon. In the "Registration / Administration" Menu,
select "Group Properties" and assign a Communication Frequency Channel for
the selected Group.
* By right clicking on the Group icon, a popup menu will appear where you can select "Group
Properties" to display the properties window.
- Once a Communication Frequency Channel setting has been made, it cannot be changed.
- If a different Group is located nearby and there is a possibility that communication could occur
at the same time, please make sure to set the Communication Frequency Channels for each
Group to a different setting. If two Groups use the same Communication Frequency Channel at
the same time, there is a great possibility that a communication failure will occur.
4. Click the [OK] button to finish the Group settings.
3.
Registering a Remote Unit
1. Place a Data Logger face down on the RTR-5W.
2. Select the Group in which you wish to register Remote Units from the
Administrator Tree. In the "Registration/Administration" Menu, select "Remote
Unit (RTR-5, RVR-5) Registration" to display the Remote Unit Registration
window.
* By right clicking on a Group icon, a popup menu will appear where you can select "Remote
Unit Registration" to display the registration window.
3. Enter a name for the Remote Unit and click the [Register] button to finish the
registration.
* In the Remote Name, you cannot use a space, or any of the following characters [\ /:,;*?"<>|&]
(Up to 8 characters can be entered.)
-
If you are using an RVR-52A logger, click the [RVR-52A Measuring Mode] button and select the
desired measuring mode.
If you wish to register other Remote Units, repeat the process as in steps 1~3.
4.
Sending Registration Info to an RTR-5W
1. Select a Location from the Administration Tree, and in the "Settings" Menu,
select "Send Group / Remote Info".
[Send]
button
2. Click the [Send] button to send the registration info to the RTR-5W and
complete the settings.
* After making any changes to the settings, make sure to repeat step 4 above.
Assign a Communication
Frequency Channel
[OK]
button
Administration Tree
Select the Group into which
you wish to register a
Remote Unit.
Enter the Remote
Unit Name
[Register]
button
[RVR-52A Measuring Mode]
button
[Set] button
[Access Settings]
When using the network default
settings, enter the IP address and
Domain that was assigned.
[Browser Display Settings]
