T&D RTR-500, Руководство пользователя

Страница: 32 / 44

Notes about Operation 30
LED Lamp Display
POWER
ACTIVE
DIAG
ALARM
LED Status
ON BLINKING OFF
Description
ACTIVE
Network communication available
Connected via USB
ACTIVE
Network communication in progress
(wireless communication with Remote Unit)
USB communication in progress
DIAG
Initializing after power turned ON
FTP or E-mail transmission failed
ACTIVE DIAG
Clock Settings not completed
Clock settings have been reset
(power failure and so on)
No Remote Units have been registered
FTP or E-mail settings have not been properly made
No Settings for autonomic operations such as
monitoring have been made
ACTIVE DIAG
Failed to connect to wireless LAN access point
(only RTR-500AW)
IP address cannot be received from DHCP server
ALARM
A measurement has exceeded the set upper or lower
limit
A Remote Unit wireless error has occurred
The contact input is ON
There is trouble in the Remote Unit (battery level is
low, a sensor connection is poor, etc…)