24
Other
If the screen does not change after connecting RTR-574 / 576,
the USB driver installation may not have been installed correctly. Please see
[Help for Unit Recognition Failure] and check the USB driver.
3. Base Unit Operational Settings
Next please make all Base Unit operational settings from the Menu of
the RTR-500 Settings Utility.
4. Repeater Registration (Only if necessary)
Repeaters can be registered to help increase range and improve
wireless communication.
1. In the RTR-500 Settings Utility, open the [Repeater Unit
Settings] Menu.
2. When the direction appears in the application window,
connect the Repeater with a USB communication cable to the
computer.
- Do not connect multiple RTR-500 Units at the same time.
USB Connection
PC into which software
has been installed
After all registrations and settings have been completed, place the
Base Unit, Remote Units and Repeaters in their actual positions and
carry out signal strength tests to test transmission.
Содержание RTR-500
