G e n e r a l i n f o r m a t i o n
16
To activate or deactivate transmission barring, select
→
.
Transmission barring should be active before you enter the area
where you want transmission to be barred.
or
is displayed in
the idle mode when transmission barring is active. Depending on
predefined radio settings, the radio may send a notification message
to the network about the activation.
is displayed if the message
does not need to be sent or message sending failed, and
is
displayed if the message has been sent.
Q
Network selection
In addition to your predefined home network, you may be able to
select other networks in which your radio can operate (network
service), for example, if you are not in the coverage area of your
home network. The network can be changed automatically or
manually; see Network selection on page 95.
Some services are network dependent, so the availability of services
may change when the network is changed. In addition, the selected
folder, selected group, home group, or the availability of groups may
change when the network is changed.
Q
Using your radio in wet and damp conditions
•
You can use this radio in the rain, but do not submerge it in water.
•
If the radio or the system connector has been exposed to salt water, wash
it immediately with freshwater to avoid corrosion. The radio must be
carefully wiped dry.
•
Before opening the back cover, dry the radio to prevent water from
reaching the interior of the radio. The battery is not water resistant.
•
Never charge the radio when the bottom connector is wet or damp.
•
Never use a damp radio with enhancements that have an electrical
function (such as a desk stand or car kit).
THR880i_Rel6_en_print.book Page 16 Jeudi, 20. novembre 2008 2:13 14
