![T&D DT75 Скачать руководство пользователя страница 6](http://html1.mh-extra.com/html/tandd/dt75/dt75_instruction-manual_3078320006.webp)
12. T2
Displays temperature measured from socket T2
13. T1
Displays temperature measured from socket T1
14. 0.1°/1°
Press to change resolution/range
2. PRODUCT SPECIFIC SAFETY INFORMATION
2.1 Precautions
This product has been designed with your safety in mind, but
please pay attention to the following warnings and cautions before
use.
Warning
Before use check the unit for cracks or any other damage. Make
sure the unit is free from dust, grease and moisture. Also check any
associated leads and accessories for damage. Do not use if
damaged.
WARNING
To avoid electrical shocks, and damage to the instrument,
do not use this instrument when voltages at the
measurement surface exceed 24V AC or 60V DC.
To avoid burns or damage to equipment, do not take
temperature measurements inside microwave ovens.
CAUTION
Repeated flexing can break the thermocouple
leads. To prolong lead life, avoid sharp bends in the
leads, especially near the connector.
!
!
This warranty is the buyer’s sole and exclusive remedy and is in
lieu of all other warranties, expressed or implied, including but not
limited to any implied warranty of merchantability or fitness for a
particular purpose. Martindale shall not be liable for any special,
indirect, incidental or consequential damages or losses, including
loss of data, arising from any cause or theory.
Since some jurisdictions do not allow limitation of the term of an
implied warranty, or exclusion or limitation of incidental or
consequential damages, the limitations and exclusions of this
warranty may not apply to every buyer. If any part of any provision of
this warranty is held invalid or unenforceable by a court or other
decision-maker of competent jurisdiction, such holding will not affect
the validity or enforceability of any other provision or other part of that
provision.
Nothing in this statement reduces your statutory rights.
3
8
12. T2
Displays temperature measured from socket T2
13. T1
Displays temperature measured from socket T1
14. 0.1°/1°
Press to change resolution/range
2. PRODUCT SPECIFIC SAFETY INFORMATION
2.1 Precautions
This product has been designed with your safety in mind, but
please pay attention to the following warnings and cautions before
use.
Warning
Before use check the unit for cracks or any other damage. Make
sure the unit is free from dust, grease and moisture. Also check any
associated leads and accessories for damage. Do not use if
damaged.
WARNING
To avoid electrical shocks, and damage to the instrument,
do not use this instrument when voltages at the
measurement surface exceed 24V AC or 60V DC.
To avoid burns or damage to equipment, do not take
temperature measurements inside microwave ovens.
CAUTION
Repeated flexing can break the thermocouple
leads. To prolong lead life, avoid sharp bends in the
leads, especially near the connector.
!
!
This warranty is the buyer’s sole and exclusive remedy and is in
lieu of all other warranties, expressed or implied, including but not
limited to any implied warranty of merchantability or fitness for a
particular purpose. Martindale shall not be liable for any special,
indirect, incidental or consequential damages or losses, including
loss of data, arising from any cause or theory.
Since some jurisdictions do not allow limitation of the term of an
implied warranty, or exclusion or limitation of incidental or
consequential damages, the limitations and exclusions of this
warranty may not apply to every buyer. If any part of any provision of
this warranty is held invalid or unenforceable by a court or other
decision-maker of competent jurisdiction, such holding will not affect
the validity or enforceability of any other provision or other part of that
provision.
Nothing in this statement reduces your statutory rights.
3
8