300109-16
TC36.NGST03.C
5056.42801.C3
4
5. Connect the pilot electrical leads to
the bulkhead. The orange ignitor wire
goes to the connector at the rear of
the bulkhead (marked with an red dot
Fig. #5).
NOTE: If converting to propane fuel
refer to page 9 before continuing.
6. Attach the inlet cover using the top
screw of the bulkhead (Fig. #6).
Install the right porcelain panel (as in
Fig. #3).
7. Position the right burner shield over
the inlet cover ensuring that the pilot
assembly is protruding through the
half-hole between the inlet cover and
the right burner shield (Fig. #7).
Fig. # 5
Fig. # 6
Fig. # 7
Содержание TC36.NGST03.C
Страница 15: ...300109 16 TC36 NGST03 C 5056 42801 C3 15 Notes...
