TANDBERG Voyager E5784, Руководство пользователя

Страница: 9 / 28

Voyager E5784 and E5788 HD DSNG Encoder
9
2.4 Power Supply Stand-by Switch
This switch puts the Encoder into stand-by mode. It powers down the
supply rails of the display and internal circuits within the unit. The
switch type avoids accidental powering-down of the Encoder. For normal
use, using a screwdriver, ensure that the
I
is always at the top (see
Figure 2.1).
NOTES
1. This product should be operated only from the type of power
source indicated on the marking label.
2. If you are not sure of the type of power supply to your
business, consult a qualified electrical engineer or your local
power company.
WARNING
This is NOT a mains switch and will not isolate the Encoder from the
power supply. Disconnect the power cord to isolate the unit.
Figure 2.1: Stand-by Switch
On position
Stand-by position