TANDBERG Videoconferencing System
Installation
13
ENGLISH
Precautions
• Never install telephone wiring during a lightning storm.
• Never install telephone jacks in wet locations unless the jack is specifically designed for wet locations.
• Never touch uninstalled telephone wires or terminals unless the telephone line has been disconnected at the network interface.
• Use caution when installing or modifying telephone lines.
• Avoid using a telephone (other than a cordless type) during an electrical storm. There may be a remote risk of electrical shock from
lightning.
• Do not use the telephone to report a gas leak in the vicinity of the leak.
• The socket outlet shall be installed near to the equipment and shall be easily accessible.
• Never install cables without first switching the power OFF.
• 1TR6 network type is not approved for connection directly to the telecommunications network. This network type is only to be used
behind a PABX.
• X.21 network type is not approved for connection directly to the telecommunications network. This network type is only to be used
together with already approved equipment, and is not meant for direct connections to the telecommunication networks.
• V.35/RS-449/RS-366 network type is not approved for connection directly to the telecommunications network. This network type is
only to be used together with already approved equipment, and is not intended for direct connection to the telecommunication
networks.
• Japan only: This equipment is approved by Japanese Approvals Institute for Telecommunications Equipment (JATE), approval number
TANDBERG 550: C01-0187JP, TANDBERG 880: C01-0188JP, TANDBERG 1000: C01-0264JP, Codec 2500 (TTC6-02): C01-0186JP,
Codec 6000 (TTC6-01): C01-0185JP and should be used in accordance with the instructions any other usage will invalidate the
approval.
• Japan only: This equipment can be used only with the remote control provided. The use of other remote controls will violate the
Telecommunications Business Law.
• Japan only: Establishing calls using the dataport and connecting the Net-port to public networks, the JATE approval will be
invalidated.
• This product complies with directives:
89/366/EEC
73/23/EEC
99/5/EEC
Installation
Unpacking
TANDBERG 2500/6000:
• Place and fasten the top plate on top of the cabinet.
• Place the monitor on top of the cabinet and ensure it is stable.
• Place the camera centrally, on top of the monitor close to the front.
TANDBERG 550/880/1000:
For installation of the TANDBERG 550/TANDBERG 880/TANDBERG 1000, see the separate Installation Sheet
following the product.
