Menus
Instruction Manual: TT1260 Standard Definition Professional Receiver/Decoder
Page C-19
ST.TM.E10100.1
C.9
System Menu (#6)
Table C.30: System Menu
Display title: System
Description
Section
Setup
The Setup submenu allows the user to edit the operating mode,
LCD contrast, serial remote protocol, IP address, subnet mask,
service hunt mode, and the customisation key.
C.9.1
IRD Details
The IRD Details submenu diplays the software, firmware,
hardware, PLD version and electronic serial number of the IRD.
C.9.2
System Restart
The System Restart submenu allows the user to restart the unit.
C.9.3
C.9.1
Setup Menu
The Setup submenu allows the user to edit the operating mode, LCD
contrast, serial remote protocol, IP address, subnet mask, service hunt
mode, and the customisation key.
Table C.31: Setup Menu
Display title: Setup
Description
Date: XX/XX/XXXX
Time: YY:YY:YY
XX/XX/XXXX is the system date from the TDT
YY:YY:YY is the system time from the TDT
Operating Mode
XXXXXXXXXXXXX
XXXXXXXXXXXXX is editable:
FRONT PANEL
SERIAL REMOTE
DIRECTOR NCP
LCD Contrast XXXXXX
XXXXXX is editable in the range:
LOW
MEDIUM
HIGH
Serial Remote Protocol
XXXXXXXXXXXXXXXXXXXXX
XXXXXXXXXXXXXXXXXXXXX is editable:
RS232 TTV, RS232 ALTEIA AT ADDR YYY, RS485 ALTEIA AT ADDR YYY
where YYY is IRD address from 000 to 999.
IP Address
XX.XX.XX.XX.XX.XX
XX.XX.XX.XX.XX.XX is the editable IP address
Subnet Mask
XX.XX.XX.XX.XX.XX
XX.XX.XX.XX.XX.XX is the editable subnet mask
Restore System Defaults
Restores system defaults.
Service Hunt Mode
XXXXXXXX
XXXXXXXX is the editable parameter for setting automatic service selection
(ENABLED, DISABLED)
Customisation Key
XXXXXXXXXXXXXXXXXXXXXX
XXXXXXXXXXXXXXXXXXXXXX is the editable parameter for entering
customisation keys