TANDBERG TT-1222, Справочное руководство

Страница: 98 / 132

Front Panel LCD Menus
Page C-10 Reference Guide: TT1222 4:2:0 Professional Receiver
ST.RE.TT1222.2
Table C.8: Audio2 Service Menu
Menu title: SET:AUD2 SERVICE Description Section
Service ID > Display or change the service ID for the decoded service. C.5.5
Track Audio 1: Audio 2 can be set to track Audio 1.
Off: Audio 2 can be set to decode a different audio service.
On: Audio 2 will be the same audio service as Audio 1.
NOTE…
When this is selected, the Audio 2 service ID
menu is frozen and can not be used. It will
show the Audio 1 service ID.
Default = On.
----
Aud2 Type
*
: Defines the preferred audio format.
Musicam – The receiver will decode the Musicam packets
AC-3 - The receiver will decode the AC-3 packets (if this
software option is enabled on the receiver)
Default = Musicam.
NOTE…
*
This option is only available if the AC-3
software option has been enabled on the
receiver.
----
Aud2 Lang: Allows the entry of the three character ISO language code (e.g.
eng or nor). This code selects the correct audio PID for the
selected audio service.
If the selected code is not present in the audio stream, the first
audio stream in the PMT table will be used.
Default = eng ----
C.5.5 Audio 2 Service ID
Table C.9: Audio 2 Service ID Menu
Menu title: SET:AUD2 SERVICEID Description Section
Service ID: The PID of the required audio service can be entered directly.
Alternatively, the user can scroll down and select from a list of
recognised services. ----
C.5.6 Video Setup
Table C.10: Video Setup Menu
Menu title: SET:VIDEO SETUP Description Section
625 Setup > Enters the 625 Video Setup submenu C.5.7
525 Setup > Enters the 525 Video Setup submenu 0
Default o/p > Enters the Default Output menu C.5.9