TANDBERG Telepresence T3, Инструкция по сборке

Страница: 26 / 58

PAGE 26/58
119078.01 TELEPRESENCE T3 SYSTEM ASSEMBLY 12.08
TANDBERG
Telepresence T3
do as follows:
1. Open the top cover.
2.
Locate the camera cable.
3.
Hold the camera upside down.
4. Connect the HDMI and RJ45 connectors of the camera cable.
RJ45 HDMI
Mounting hole (Tripod) 1/4" UNC
116606 rev.06
Rev S/N
www.tandberg.com/recycling
( )
Made in Norway
( )
PrecisionHD 1080p
TTC8-02
2
0 0 0 0 0 0 0 0 1 1 1
Video format 3
0 0 0 0 1 1 1 1 0 0 0
4
0 0 1 1 0 0 1 1 0 0 1
1 0 0 0 0 0 0 0 0 0 0 0
5
HD-SDI
0
Auto*
1 1080p25 0 1080p30 1 1080p50 0 1080p60 1 720p25 0 720p30 1 720p50 0 720p60 1 480p60 0
SW control**
1080p25 1080p30 720p50 720p60 720p25 720p30 720p50 720p60 480p60
1 0
HDMI
*Camera negotiates format over HDMI, HD-SDI tracks HDMI, and defaults to 1080p30 in absence of HDMI syn
c.
**Please consult manual.
HDMI RJ45
5.
Carefully slide the camera into place.
mountinG thE CAmErA
flickering image?
Some countries use a line
frequency of 50 Hz, while others use 60 Hz.
Default camera setting is for 50 Hz, which will
cause the image to flicker in 60 Hz regions. To
rectify this, set the DIP switches to 1080p60
when used in countries with 60Hz line
frequency—see the table on the camera’s
underside.