TANDBERG TacticalMXP, Руководство пользователя

Страница: 179 / 316

Administrator Settings
165
5.5.2 Outputs
Audio out 1 - 2
Audio out 1 is intended for connection to televisions or audio amplifiers.
Audio out 2 is intended for connection to a VCR or other recording equipment. The signal is a mix
of audio from far end and local end (except VCR in).
Note that audio out 2 never should be connected to a loudspeaker placed in the same room as
the microphones connected to the system. This will cause "howling" and possible damage to the
speaker system. If an output is Off, no audio will be sent to that output.
Signal levels -
line level
outputs* Absolute max.
output level Nominal
level
Output menu
level settings Vpp dBu dBu
0.0 dB 1.2 Vpp -5.5 dBu -23.5 dBu
1.5 dB 1.4 Vpp -4.0 dBu -22.0 dBu
3.0 dB
1.6 Vpp -2.5 dBu -20.5 dBu
4.5 dB 1.9 Vpp -1.0 dBu -19.0 dBu
6.0 dB 2.3 Vpp 0.5 dBu -17.5 dBu
7.5 dB 2.8 Vpp 2.0 dBu -16.0 dBu
9.0 dB 3.3 Vpp 3.5 dBu -14.5 dBu
10.5 dB 3.9 Vpp 5.0 dBu -13.0 dBu
12.0 dB 4.6 Vpp 6.5 dBu -11.5 dBu
13.5 dB 5.5 Vpp 8.0 dBu -10.0 dBu
15.0 dB
6.5 Vpp 9.5 dBu -8.5 dBu
16.5 dB 7.8 Vpp 11.0 dBu -7.0 dBu
18.0 dB 9.2 Vpp 12.5 dBu -5.5 dBu
19.5 dB 11.0 Vpp 14.0 dBu -4.0 dBu
21.0 dB 13.0 Vpp 15.5 dBu -2.5 dBu
22.5 dB 15.5 Vpp 17.0 dBu -1.0 dBu
* Applies to Output 1 at volume setting 15.
Note that for the dBu value for input clipping level and absolute max output level, a sine waveform
is assumed. If numbers in dBV are required, dBV value is 2.2 dB lower than the dBu value, e.q. -
10 dBu equals -12.2 dBV
Please see Interfaces for details on the audio connectors.