TANDBERG SM6610, Справочное руководство

Страница: 11 / 200

Introduction
Reference Guide: SM6610, SM6615, SM6620 and SM6625 Satellite Modulators Page 1-3
ST.RE.E10152.2
1.1 Scope of This Manual
1.1.1 What This Manual Describes
This manual describes the functions and operations of the SM6600 range
of Satellite Modulators and is written for its operators/users. It includes
information on the installation and day-to-day care and operation of the
unit. It does not include any maintenance information that requires the
removal of covers. Removing the covers of this equipment may invalidate
any warranty.
Figure 1.1: Modulator Front View
1.1.2 Software Version
This manual has been written to cover the functionality of software version
2.0 and later. This manual continues to be relevant to subsequent
software issues where the functionality of the equipment has not changed.
Where a new issue of software changes the functionality, a new issue of
this manual is provided.
The software version can be found:
•
On the startup screen
•
In the local control mode (see Chapter 3):
In the Main menu by selecting option 7, Software Update menu
and then, from there, choosing option 3, Display Code Versions
In the Test menu by selecting option 3, Version and Build
Information (the appropriate entry is the Controller Card, main
software version)
•
In the front panel menu by selecting Build Information under the
System Menu option.
1.1.3 Equipment Models
The SM6600 range of Satellite Modulators encompasses four base unit
models and a number of hardware and software options. Each Modulator
comprises an enclosure with several cards fitted. This manual covers the
current hardware in which the latest firmware may be installed. The
marketing code and part numbers are shown in Table 1.1.
Table 1.1: Marketing Code Descriptions of Basic Units
Marketing Code Part Number Description
SM6610/BAS E10152 Satellite Modulator Base Unit with IF Output
SM6615/BAS E10153 Satellite Modulator Base Unit with L-Band Output
SM6620/BAS E10154 Satellite Modulator Base Unit with IF Output and PREKOR
SM6625/BAS E10155 Satellite Modulator Base Unit with L-Band Output and PREKOR
SM66XX/HWO/ASI-SPI S13450 DVB ASI & SPI Input Card
SM66XX/SWO/HOM N/A Higher Order Modulation (8PSK and 16QAM)