TANDBERG MXP Скачать руководство пользователя страница 1

Страница: 1 / 52

MXP Series Video Endpoints

User Guide

D1479201 MXP Series User Guide, May 2011.
© 2010-2011 Cisco Systems, Inc. All rights reserved.

MXP Series Video Endpoints

User Guide

Thank you for choosing TANDBERG!
TANDBERG video conferencing offers the

natural communication experience of a

face-to–face meeting in ways that other

technologies cannot.
Your TANDBERG MXP video endpoint has

been designed to give you many years of

safe, reliable operation.
This user guide has been divided into

several chapters, all of which provide

different information. You can access the

chapters directly by clicking on the menu

bar at the top of this page.
You will find that some places information

has been copied from other chapters (but

adapted, when needed) to let you have all

the relevant information there and then.

This helps eliminating the need to read

through long sections before you can even

think of getting started.

Software version F8.x
May 2011

www.cisco.com

Содержание MXP





















































Результаты поиска

Содержание MXP

Отзывы:

Бренды по названию

Популярные бренды

TANDBERG MXP, Руководство пользователя

Результаты поиска

Содержание MXP

Отзывы:

Бренды по названию

Популярные бренды