TANDBERG Hub, Руководство пользователя, Страница: 13 / 62

TANDBERG 3G Gateway User Manual
2.1 Unpacking
To avoid damage to the unit during transportation, the 3G Gateway is delivered in a special
shipping box, which should contain the following components:
ƒ
User Manual and other documentation on CD.
ƒ
Rack-ears, screws and screwdriver.
ƒ
Cables:
o
Power cable
o
One to four ISDN PRI cables, depending on the number PRI Option keys, or 4
ISDN BRI cables depending on the version.
o
Ethernet cable
o
RS232 cable
ƒ
TANDBERG 3G Gateway
Installation site preparations
ƒ
Make sure that the 3G Gateway is accessible and that all cables can be easily
connected.
ƒ
For ventilation: Leave a space of at least 10cm (4 inches) behind the 3G Gateway’s rear
panel and 10cm (4 inches) in front of the front panel.
ƒ
The room in which you install the 3G Gateway should have an ambient temperature
between 0
º
C and 35
º
C (32
º
F and 95
º
F) and between 10% and 90% non-condensing
relative humidity.
ƒ
Do not place heavy objects directly on top of the 3G Gateway.
ƒ
Do not place hot objects directly on top, or directly beneath the 3G Gateway.
ƒ
Use a grounded AC power outlet for the 3G Gateway.
ƒ
You will need a CSU (Channel Service Unit) between your system and the PRI line from
your network provider.
ƒ
Make sure that it is possible to receive and to make Mobile(h324M) video calls from
behind this line. Check this with your network operator!
ƒ
If you are behind a PABX make sure that the PBABX is capable of routing Mobile
(H324M) video calls.
13