Tandberg Data
Setting Up
_____________________________________________________________
2-3
Tandberg Viking FS-1600 Series NAS Hardware User Manual
2.1.9. Sufficient
Ventilation
The vents on the front panel and the fan openings on the rear panel provide
ventilation for the FS-1600 Series NAS appliance. Make sure that these
openings are not blocked and that adequate ventilation is provided where
the unit is installed.
2.2. Accessing the HDD Tray & Installing Hard
Drives
To install HDD to the FS-1600 Series NAS appliance, remove the drive tray
from the chassis in order to mount any Serial-ATA I or II HDD.
1.
Press the release tab to release the drive tray from its locking
position.
2.
Pull the drive tray out from the chassis by:
a.
Pressing the tray handle release button.
b.
Grab the tray handle and pull out the drive tray from the
chassis.
3.
Remove the 2 screws at each side of the dummy tray and take out
the dummy tray as shown below:
Drive Tray
Dummy Drive
Release Button
