manualshive.com logo in svg

TANDBERG EN8000, Справочное руководство

"На сайте manualshive.com вы можете бесплатно скачать руководство пользователя для продукта TANDBERG EN8000. Это справочное руководство содержит все необходимые инструкции и сведения о данном приборе. Скачайте его сейчас, чтобы получить подробную информацию о функциях и настройках TANDBERG EN8000."

Поделиться
Скачать
background image

  

Web Browser Interface — Audio Menu 

Reference Guide: EN8000 MPEG-4 Part 10 (H.264/AVC) Encoders 

Page 5-39 

ST.RE.E10233.1 

 

Advanced Audio Webpage Options 

Table 5.15 lists the Advanced Audio options and associated descriptions in the order they 
appear on the webpage. 

Table 5.15: Advanced Audio Webpage Option Descriptions 

Selected Item 

Options 

Description 

Off: 

No data is generated from this module and this component does not exist on the SI 
tables. 

Embedded Source 1-8  The audio content is extracted from the DID of the embedded source input defined 

in the Audio Control menu. 

Digital 

The audio content is routed from the Audio In 2 connector as described in 

Section 

2.6.6

. 

Test tone 

The audio content for this module is artificially generated as a 1 kHz tone on both 
the left and right channel. This is used for system test purposes. 

Input Source:  
Defines the source of the audio 
content that is to be encoded 
using this module. There is no 
capability for the input of the 
analogue audio content. 

Mute 

The audio content for this module is artificially generated as silence on both the left 
and right channel. This is used for system test purposes. 

Uncompressed/PCM 

The audio content has not been compressed. 
 

Input Format: 
Describes the format of the 
incoming audio content. This is 
used to restrict the available 
coding standards to those that 
are available for the format. 

Dolby Digital 

The incoming audio content has been pre-encoded using the Dolby Digital 
algorithm. 

MPEG-2 AAC 

This algorithm implements the low complexity profile of ISO/IEC 13818-7 using 
ADTS (Audio Data on Transport Stream) encapsulation of the audio data. More 
details are supplied in 

Annex E

.  

NOTE… 

If MPEG-2 AAC is not licenced, the only available option for 

Input Format is “Dolby Digital” and the only available option for 

Coding Standard is “Passthru”.

 

Coding Standard: 
Defines the algorithm that is 
used to encode the input audio 
content. This list has been 
restricted by the selection 
made for the Input Format 
above. For 
Uncompressed/PCM input 
format, the available coding 
standard depends on licensing. 

For Dolby Digital input 
format: Passthru: 

This algorithm encapsulates the incoming Dolby Digital bitstream into the Transport 
Stream according to ETSI TS 102 366. As there is no encoding, there is no licence 
associated with this feature. 

Stereo: 

64, 80, 96, 112, 128, 160, 192 kbit/s 
 

5.1: 

128, 160, 192 kbit/s 

Bitrate (for MPEG-2 AAC):  
Specifies the bitrate for the 
encoding of the input audio 
content if the input format is 
uncompressed.  

For passthru operation, the encoding bitrate is assumed to 640 kbit/s to ensure that sufficient bit allocation is 
given to the audio component. The value specified in this option is ignored. 

Stereo:  

For two uncompressed channels. 

Surround/5.1: 

For six uncompressed channel encoding on Service 4A only 

NOTE… 

If Surround/5.1 is selected on Service 4A, then Service 4B and 

4C are not available as they are used to aid in the implement 

the 5.1 bitstream. 

Coding Mode: 
Specifies the number of audio 
channels to be included in the 
encoding. 

Pre-encoded Data: 

For passthru operation 

 

Содержание EN8000





































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для EN8000

Cablematic HC44 User Manual preview
HC44
Бренд: Cablematic Страницы: 2
National Instruments NI PXIe-5601 Calibration Procedure preview
NI PXIe-5601
Бренд: National Instruments Страницы: 45
Vanco 280708 Technical Support preview
280708
Бренд: Vanco Страницы: 16
VXI SVM2608 User Manual preview
SVM2608
Бренд: VXI Страницы: 57
Radial Engineering JDI Mk3 User Manual preview
JDI Mk3
Бренд: Radial Engineering Страницы: 18
Irenis BLANKOM SDE-1265 Manual preview
BLANKOM SDE-1265
Бренд: Irenis Страницы: 22
DAB MCE-150/P Instructions Manual preview
MCE-150/P
Бренд: DAB Страницы: 1024
Linksys LO3040 Specifications preview
LO3040
Бренд: Linksys Страницы: 2
Kaco blueplanet 87.0 TL3 Manual preview
blueplanet 87.0 TL3
Бренд: Kaco Страницы: 115
Delta-Opti OMG1-SM User Manual preview
OMG1-SM
Бренд: Delta-Opti Страницы: 3
Linear Technology DC1825A Demo Manual preview
DC1825A
Бренд: Linear Technology Страницы: 6
Tripp Lite N035-001 Owner'S Manual preview
N035-001
Бренд: Tripp Lite Страницы: 4
Dynamix 20km 10/100/1000WDM User Manual preview
20km 10/100/1000WDM
Бренд: Dynamix Страницы: 2
PhD Solutions SP-1x2-HD3D Operation Manual preview
SP-1x2-HD3D
Бренд: PhD Solutions Страницы: 12
Thinklogical VDA-1 Product Manual preview
VDA-1
Бренд: Thinklogical Страницы: 19
Leotec Reproductor MP4 User Manual preview
Reproductor MP4
Бренд: Leotec Страницы: 32
Black Box IC920A User Manual preview
IC920A
Бренд: Black Box Страницы: 19
AirMan SG Instruction Manual preview
SG
Бренд: AirMan Страницы: 66

Бренды по названию

Популярные бренды

Загрузить еще бренды