Page 5 of 9
TANDBERG DUAL PLASMA CART ASSEMBLY | D50526.06
9.
Affix POWER BAR with Velcro
and CABLE RACEWAY with
double-sided tape as shown.
10.
Mount COVER PANEL using
¼“–20 x 3” BOLTS & NUTS (6).
11.
If the AUDIO AMPLIFIER
OPTION is available, use the
M3 x 8 SCREWS (2) to attach
the AMPLIFIER to any of the
SPEAKER BRACKETS-A.
12.
Place .5” SPACERS (3) behind
the SPEAKER BRACKETS-A (3)
and mount them to each of
the POSTS using ¼”–20 x 3¼”
BOLT & NUTS and ¼”
WASHERS. The CENTER
BRACKET should include the
AUDIO AMPLIFIER.
DO NOT TIGHTEN SPEAKER
BRACKETS AT THIS TIME.
13.
Remove the top cover for the
display box. Leave the
display in the bottom
packaging for the next step.
14.
Align and secure the DISPLAY
MOUNTING BRACKETS (2 x2)
to the matching pair of
mounting holes on the rear
of the DISPLAY using the M8
BOLTS (4 x2)*.
* If needed, install the brackets with
the included ALUMINIUM
SPACERS.
MAX WEIGHT = 200LBS. EACH
