TANDBERG 550 MXP Скачать руководство пользователя

Страница: 298 / 301

TANDBERG 550 MXP

284

Streaming TTL/Router Hops:

Used for streaming data to limit how many routers the data should

pass before it is rejected.

Streaming Video Rate:

Defines the Video streaming rate from the system.

SVGA:

Super VGA. (800x600)

SXGA:

Super extended Graphics Array (1280x1024)

System information:

Lists system numbers, line status, software version and other useful

information.

System name:

Identifies a videoconferencing system

T1:

Network type, 24 channels. Default for NTSC versions.

T1 Line Coding:

Indicates how the signals on the line should be coded. If parts of the systems

use restricted coding, this should be selected.

Take chair:

Request chairmanship of the conference. If no one else is chairman, the request is

granted.

TCS-4:

Used to address different systems on a LAN when dialing in via a gateway.

Terminal Names:

Lists the site numbers or name (if supported) of other sites connected in the

conference.

Terminate meeting:

The chairman can terminate the conference, i.e. all participants are

disconnected.

TMS:

TANDBERG Management Suite

Touch Tones:

To dial extension numbers etc. during a call, use touch tones in order to get tones

instead of preset on the number keys.

Tracker:

The tracker is a small infrared remote control device made to steer the camera to any

desired location within the room.

TSC-1:

TCS-1 is used for H243 password on H320 MCU's

VCR:

Video Cassette Recorder

VGA:

Video Graphics Array. (640 x 480)

VGA Out Quality:

Changes the resolution of the VGA signal available in the VGA Out connector

at the rear of the codec.

View Settings:

Displays all the system settings in a read only format.

View site:

View any participant in the conference other than the participant currently On Air. Can

be used by all conference participants.

VNC:

Virtual Network Computing.

Voice Switched:

The active site will be displayed in full screen during a MultiSite conference.

Содержание 550 MXP














































































































































































































































































































Результаты поиска

Содержание 550 MXP

Отзывы:

Похожие инструкции для 550 MXP

Бренды по названию

Популярные бренды

TANDBERG 550 MXP, Руководство пользователя

Результаты поиска

Содержание 550 MXP

Отзывы:

Похожие инструкции для 550 MXP

Бренды по названию

Популярные бренды