Tandberg Data Storage Library T24 Скачать руководство пользователя страница 4

OF

 8

2.

Front of rack

—Insert an M5 screw (

A

) through one of the front rack screw holes (

B

) and 

engage the pem nut in the rail flange (

C

). If your rack has square mounting holes or the 

holes are much larger than the screws provided in the kit, use a washer. Finger-tighten 

the screw.

Insert an M5 screw (

A

) through a second screw hole (

B

) and engage the pem nut on the 

second screw hole in the rail flange (

C

). If necessary, use a washer. Finger-tighten the 

screw.

3.

Adjust the length of the rail assembly as necessary to fit the depth of the rack (

E

).

4.

Back of rack

—Make sure the rail assembly is level, then use M5 screws (

A

) to attach the 

back flange (

D

) of the rail to the 

inside

 of the rack, using the same procedure as step 2. 

If your rack has square mounting holes or the holes are much larger than the screws 

provided in the kit, use a washer. Finger-tighten the screws. 

5.

Using a #2 Phillips screwdriver, tighten the screws securing the rails to the front and 

back of the rack.

6.

Using a #2 Phillips screwdriver, tighten the four screws holding the rail assembly 

together.

7.

Right side rail assembly

—Repeat steps 1 through 6 for the right-side rail assembly. 

Make sure that the right rail assembly is at the same level as the left rail assembly.

A

TTACHING

 

THE

 L

IBRARY

 

TO

 

THE

 R

AILS

To attach the library to the rails:

1.

From the front of the rack, place the library onto the shelf created by the rails.

Tandberg StorageLibrary T24 Weight Warning—

 

Warning

The library weighs 43 pounds (19.5 kg). Two people are 

needed to move or lift the library. Most of the weight is toward 

the back of the library.

Warnung

Die Library wiegt 19.5 kg Es sind mindestens 2 Personen 

erforderlich, um die Library zu bewegen oder zu heben. Der 

hintere Teil Library hat das grö

β

te Gewicht.

Advertencia

La biblioteca montada sobre bastidor pesa 19.5 kg Se necesi-

tan dos personas para mover o levantar la biblioteca. La parte 

trasera de la biblioteca es la de mayor peso.

Содержание Storage Library T24









Отзывы: