Tandberg Data MSERIES, Руководство по установке

Страница: 38 / 52

Tandberg Data M-Series Installation Guide
Document T6423046-02 A01
February 2004
38 Preparing and Inserting Tape Cartridges
Figure 34 Inserting DLT
Cartridges into a Magazine
5
Insert the magazines into the library, sliding them back until they click
into place.
6
Close the magazine access doors.
Placing Tape Cartridges in an M2500
0
To place tape cartridges in an M2500:
1
Press the buttons next to the magazine access doors.
The magazine access doors open.
2
Remove the level 1 left magazine:
a
Grasping the handle at the front of the level 1 left magazine, pull it
forward until it stops.
b
If the magazine stops after the first slot, perform steps 2c through 2e
to release it.
c
Remove the level 2 left magazine (see figure 35 ).
Cartridge
retaining latch
Label Write-protect
switch