Tanco Autowrap - I75 Multi Shear
Operator’s Manual
8
Operating the Multi Shear for a pit silage
1. With the Multi Shear fully open, approach the pit and move the tractor forward until the Shear Grabs’ main frame is pressed
tightly against the pit.
2. Move the hydraulic control lever to close the shear frame down onto the pit, cutting a clean block of silage and leaving a
sealed face to prevent secondary fermentation.
3. When cutting remove a block of silage from the left hand side of the pit first, then remove a block from the very right hand
side, and finally remove a block from the middle of the pit. This ensures even cutting pressure preventing buckling.
5. OPERATING INSTRUCTIONS
