OPERATION
1.
“A” on the
center of the display
indicates that the controller is set in
Automatic mode.
2.
With the rollers in the open position,
bring the machine into the bale.
3.
Press “
Rollers in
” (a) to load the bale.
4.
Press “
Auto start
” (b) to begin the
wrapping cycle.
I.
The wrap arm will first unfold to the
straight position.
II.
It will then complete the target number of
wraps.
III.
On the last half revolution the wrap arms
will return to the folded position, and
then come to a stop after bringing the
film into the cutter.
IV.
The wrap arms will then reverse to the
center.
5.
Press “
Rollers out
” (c) to unload the
bale.
6.
To manually interrupt the wrapping
cycle, press the “
Pause
” (d) button
which will bring wrapping to a
controlled stop.
7.
Press “
Resume
” (e) to continue the
Auto-wrap cycle from where it
stopped.
Note:
“
Rollers in
” & “
Rollers out
”
functions can be operated by “one touch”
meaning that the operator does not need
to keep the button pressed. To activate
“one touch” increase “
Rollers in
” &
“
Rollers out
” time in the Operator Menu.
a
c
d
Auto mode (A)
e
a
b
