Tanco Autowrap 1300 S, Руководство оператора

Страница: 8 / 35

8
Tanco Autowrap 1300 S
Operator’s manual
6. SQUEEZE DANGER BETWEEN ROLLER ARMS AND MAIN FRAME, OUTWARDS.
When loading or unloading a new bale, the roller arms move outwards. Beware of the
danger.
Keep clear of this area .
7. SQUEEZE DANGER CAUSED BY CUT AND START UNIT.
At the end of the wrapping process the plastic is cut and held tight until the start of the
next wrapping process. When the cutter arm moves down to lock the plastic, there can
occur a squeeze danger between the cutter arm and the cutter holder. The cutter blade
that cuts the plastic is very sharp, so keep hands away from the cutter. (See fig. 2-3).
2.6
LOCKING THE WRAPPING ARM.
When the machine is not in use, make sure the locking stay for the wrapping arm is secured, and
that the locking bolt is fitted. If the locking stay is not secured, the wrapping arm and/or the
machine could be damaged during transport.
2.7 THREE POINT MOUNTING.
When the machine is mounted on the three point linkage, make sure that the lifting arms are
tightened up so there is no sideways movement.
Ensure rear window is closed or that it
cannot be hit by the Tower when the 3 point linkage is raised.
2.8 FRONT MOUNTING.
If the machine is mounted on a front loader there must be a counterweight fitted to the three point
linkage. It must be large enough to give the tractor good stability.
Connecting heavy working implements often has an overall negative effect on
the tractor's driving and braking capacity.
2.9 TRANSPORTING.
When transporting on a public road there are certain safety measures that must be taken:
1. Make sure that the locking bolt on the wrapping arm is mounted. (Chapter 2.6).
2. Move the main rollers fully inwards.
3. Always transport the machine in the lowest possible position.
4. Make sure that the machine does not cover the tractors lights. If necessary, mount extra
lights.
5. Make sure that at least 20% of the tractor's total weight is on the steering wheels.
6. If the machine is front-mounted, it's necessary to balance the weight with a counterweight
mounted to the three-point linkage.