TANBead Maelstrom 8 Autostage, Руководство пользователя

Страница: 16 / 40

14
Mixing
Mount the spin tips to the M8-H, press enter/mixing trigger to start
mixing. Press enter/mixing trigger again to stop mixing.
Collection
When mixing stopped, raise the M8-H off the wells, and press rod
button to extend magnetic rods. After the rods are completely
extended, slowly insert the M8-H with the spin tips into the well. The
beads will be collected on to the spin tips.
Vapor
After the beads in well are complete collected on the spin tips, raise
the M8-H off the wells and sit the beads in the air for vaporing.
Pause
When the M8-H is connected with the M8-H Autostage, user can
include a pause step based on experimental workflow. During the
pause step, a program paused message will be shown on the screen
and the M8-H starts beeping to remind user.
Finish
When all steps of the program are completed, a finish message will
be appeared on the screen.