TANBead M8-H, Руководство пользователя, Страница: 18 / 40

16
12 Edit Page
User can edit, copy, rename or delete programs in edit page. In the absence of the
M8-H Autostage, the program serves as a guide to lead user through the operation in
guide mode.
NOTE: The status of “Stand Connection” should be set as “Disable” (The path of Stand
Connection: Setting → System Param Setting → Stand Connection).
With the M8-H Autostage, the program acts as an automation script to coordinate
the M8-H and the M8-H Autostage.
NOTE: The status of “Stand Connection” should be set as “Enable” when the M8-H
connects with the M8-H Autostage.
To edit the protocol on the M8-H
Select the target program. User can edit, delete or copy the
program.
Program number:

User can store maximum 50 programs (01-50).
Well capacity:
The volume of solution in the well.

Input value: from 50 to 1500 (μl).

The moving range of the spin tips will be optimized based
on this volume.
Temperature:
Temperature in centigrade.

Range: from 20 to 70 (
℃
)

Enable: select for setting same temperature for all steps.
NOTE 1: These two switches are acting as “Select All” function, user can set the same
temperature for each step by using these two switches.
NOTE 2: These two switches will be cleared every time after program finish, but the
temperature which was set last time, will be remained in each step.