www.tanakapowerequipment.com
4
Owner’s Manual
TPS-200
Side case (Fig. 4-3)
Always keep the side case and drive area clean of saw dust and
debris.
Angle transmission (Fig.4-4)
Check angle transmission or angle gear for grease level about every 50 hours of
operation by removing the grease filler plug on the side of angle transmission.
If no grease can be seen on the flanks of the gears, fill the transmission with a
quality lithium based multipurpose grease up to 3/4.
Do not completely fill the transmission.
4. Maintenance
Oiler port (Fig. 4-1)
Clean the chain oiler port (1) whenever possible.
Guide bar (Fig. 4-2)
Before using the machine, clean the groove and oiler port (1) in the bar with the
special gauge offered as an optional accessory.
