- 3 -
２
Paper and Battery Setting
!
Warning: Do not set battery wrong position. Battery may burst.
1. Push cover opening button to open the cover.
2. Insert thermal paper to the printer by 1 direction.
3. Pull out the edge of the paper 2 direction, then confirm that the paper is set straight.
Note: loose of roll paper may cause jam. Please remove loose of the paper before setting.
Note: If jammed, do not pull the paper without cover opening.
4. If you want to use this printer by battery, please set batteries as follows.
<In case of alkaline battery> <In case of nickel hydride battery>
Paper Cover
Cover Opening Button.
Do not set batteries here
Break pin when set.
