Tanaka AKV-202, Руководство по обслуживанию

Страница: 26 / 32

- 25 -
8.2.5 Replacing the temperature sensor
The bath need not be removed from the main unit.
The procedure is as follows.
1) Remove the front plates (upper and lower) at
the top of the bath.
2) Remove the metal connector for the
temperature sensor.
3) Unscrew the temperature sensor setscrews
and remove the sensor.
8.2.6 Replacing the fluorescent lamp
Note: The bath need not be removed from the main unit.
1) Remove the viewing window frame from the front of the bath. (See Fig.32)
2) You will see a fluorescent lamp inside the square hole after removal. Put your hand inside and
twist the lamp to remove it. (See Fig. 33)
Specification of Fluorescent lamp: 100V-6W Straight (all 100 to 240 VAC models are common)
Fig. 32 Viewing Window Frame Fig. 33 Fluorescent Lamp
Fig. 31 Temperature Sensor