![TAMS 61622 Скачать руководство пользователя страница 8](http://html1.mh-extra.com/html/tams/61622/61622_installation-and-operation-instructions_3458313008.webp)
Driver Installation
Driver installation assumes basic knowledge about software installation
procedures specific to the platform. Refer to your platform specific operating
system documentation or contact your system administrator.
To install the t61622 driver it is not necessary for the TAMS 61622 interface
card(s) to be present in the system. Configuration, however, requires the card(s)
and driver to both be present.
Important!
The HP/Agilent IO libraries (SICL) or HTBasic for Windows
needs to be installed before you proceed with the TAMS 61622 GPIO card driver
installation.
Windows NT 4.0 Installation
1.
Make sure you have privileges enabling you to install device drivers.
2.
Insert the CD with the t61622 driver into the CD-ROM drive.
3.
Run “setup.exe” from the CD directory “
NT4_VERx.xx
”.
4.
Follow the instructions on the screen displayed by the setup utility.
5.
Follow the instructions on page 15, in the section titled:
Configuring the
Card in Windows NT4.0 / 2000 / XP
8