background image

English

RC-Link

Table of contents

1. Getting started ...........................................................................3
2. Safety instructions.......................................................................5
3. Background information: RailCom................................................6
4. Operating mode of the RC-Link....................................................8
5. Technical specifications..............................................................10
6. Connections and funcitonal tests................................................11
7. Programming the detectors´ addresses......................................15
8. Check list for troubleshooting.....................................................16
9. Guarantee bond........................................................................18
10. EU declaration of conformity......................................................19
11. Declarations conforming to the WEEE directive...........................19

© 07/2013 Tams Elektronik GmbH

All rights reserved. No part of this publication may be reproduced or
transmitted in any form  or by any means, electronic or mechanical,
including photocopying, without prior permission in writing from Tams
Elektronik GmbH.
Subject to technical modification.

Remark: 

RailCom

®

 is the registered trademark of the Lenz Elektronik

GmbH, Hüttenbergstraße 29, D-35398 Gießen. To increase the text´s
readability   we   have   refrained   from   refering   to   this   point   in   each
instance.

Page 2

tams 

elektronik

Содержание RC-Link





















Отзывы: