tams elektronik BiDiBooster, Руководство пользователя, Страница: 32 / 40

tams
elektronik
!
English BiDiBooster
9. Check list for troubleshooting

The booster is getting very hot and / or starts to smoke.
Disconnect the system from the mains immediately!
Possible reason: The connections to the track and the power supply
have been mixed up.
à
Alter the connections. Possibly the booster
has been damaged.
Problems with switching on and data transfer

The LED at the booster does not light and the locomotives cannot be
driven.
Possible reason: The power supply has been interrupted.
à
Check
the connections to the power supply (transformer).

The booster cannot be switched on or it transfers faulty signals
(locomotives do not react as intended).
Possible reason: The terminating jumpers have not been mounted
although the booster is installed at one end of the data line.
Possible reason: The terminating jumpers have been mounted
although the booster is not installed at one end of the data line.
The LED flashes in the colour yellow

The LED flashes slowly in the colour yellow.
Possible reason: The control unit has been switched off or the
connection to the control unit has been interrupted.
à
Check the
control unit and the connections.
Possible reason: The wrong port (DCC conformin / BiDiB) has been
determined. Check the settings in CV## 53 – 55 or the setting of the
jumpers JP2, JP3 and JP4.
Page 32