tams
elektronik
English
LC modules
7. Connecting the LC module
Connect the power supply, the light bulbs, LEDs or other accessories
and if neccessary switches or push-buttons, according to the following
list and connecting diagrams, to the LC module. Follow the appended
instructions below as well.
For the connection of the cables (except JP2) you find socket terminal
strips included in the package. You can plug them onto the pin strips on
the PCB and can remove them any time.
JP1
Power supply (10-18 V)
Check the polarity when connecting the module to
d.c. voltage. With a.c. voltage the polarity is of no
importance.
3-pole
JP4
Return conductor for the outputs 1 to 5
JP2
Switching input
1-pole
JP3
Outputs 1 to 5 | Max. current per output: 100 mA
5-pole
Page 22
