Tamron B005, Руководство пользователя

Страница: 4 / 13

ATTACHING AND REMOVING THE LENS
How to mount the lens
Remove the rear cap of the lens. Align the lens attachment mark on the lens barrel
with its counterpart on the camera mount and insert the lens.
In case of Nikon mount, rotate the lens counter-clockwise until it clicks into the locking
position. In case of Canon mount, rotate the lens clockwise until it clicks into the lock-
ing position.
How to detach the lens
Press the lens release button on the camera down.
In case of Nikon mount, rotate the lens clockwise until it unlocks from the camera.
In case of Canon mount, rotate the lens counter-clockwise until is unlocks from the camera.
*For further details, please read the instruction manual of your camera.
FOCUSING (Autofocus)
Switch the AF/MF switch on the lens to AF (Fig. 5). In case of Nikon camera with
the focus mode selector dial, set the focus mode to “S” or “C”, and then set the
AF/MF switch on the lens side to “AF”. Press the shutter button lightly while
viewing through the camera’s viewfinder. The lens focuses automatically.
An in-focus mark will light when lens focuses on the main subject sharply. Press the
shutter button further to photograph.
* When set on AF mode, interfering with the focusing ring may cause serious damage to the lens mechanism.
* The distance scale is marked for guidance purposes. The actual focal point may slightly differ from the distance marked
on the focal length index.
FOCUSING (Manual Focus)
Switch the AF/MF switch on the lens to MF (Fig. 6). In case of Nikon camera with the
focus mode selector dial, set the focus mode to “M”, and then set the AF/MF switch on
the lens side to “MF”. Focus manually by rotating the focusing ring while viewing
through the camera’s viewfinder. The main subject in the viewfinder will be sharp when
the lens id focused correctly.
* Even when in MF mode, turning the focusing ring while pressing the shutter button halfway, the focus aid function lamp
lights up when the picture is in focus.
* At infinity, make sure the image in the viewfinder appears sharp. The infinity position is made with certain allowances to
insure proper focus under a variety of conditions.
* For further details, please read the instruction manual of your camera.