INSTALLATION ON CAMERA
Installation
After removing the rear lens cap from the lens, align the mount positioning point on the lens
with that on the camera, and rotate the lens clockwise (counterclockwise when using Nikon
model) until you hear a click, which indicates the lens being securely locked in place.
There is no mount-positioning index marking on the lens to fit Nikon. Please align the
aperture/zoom index line on the lens with the mount-positioning index point on the camera
(same as AF Nikkor lenses) accordingly.
Detaching
While pressing the lens release button on the camera, turn the lens counterclockwise
(clockwise when using Nikon model.)
* Be careful not to touch the signal terminals of the lens during installation or removal. A
stained or damaged terminal may cause poor contact and malfunction.
FOCUSING [1]
Automatic Focusing
When the camera is used in the auto focus mode, the lens focuses automatically. During the
AF (Auto Focus) operation, the focusing ring will rotate and its movement should not be
hindered. For this reason, we recommend using the focusing ring cover. To use, pull it out to
its fullest extent.
Manual Focusing
Switch the camera to the manual focus mode and turn the focusing ring to focus while
looking through the viewfinder. The correct focus position is determined when the picture in
the viewfinder becomes sharp. If the focusing ring is rotated while pressing the shutter
release button halfway down, the focus indicator in the viewfinder will light up when the
subject comes in focus. In manual photography, focusing should always be checked through
the viewfinder even when shooting at infinity.
How to use the AF Range Selector (Model 60E for Minolta) [2]
When the Selector ring is turned clockwise (viewing from the mount side), the AF operation
range is set from 2.5m to the selected distance, while it is set from the selected position to
infinity when turned counter-clockwise.
Rotate the focusing ring to align the distance scale to the focus distance index line where
you would like to set a limit in AF operation range. Loosen the AF Range Selector ring fixing
screw and turn the Selector ring until it comes to a mechanical stop (please be sure to hold
the focusing ring, avoiding its simultaneous movement with the Selector ring.)
Tighten the AF Range Selector ring fixing screw after the above procedures are completed.
For your information, the AF Range Selector is set to the infinity range when shipped from
our factory.
Содержание 360EM
Страница 2: ......
