Tamerica TSL2700, Руководство по эксплуатации

Страница: 3 / 7

3 MACHINE OPERATION
A. LAMINATING FUNCTION
LOADING THE FILM
Unpack the upper and lower rods. Remove the feed tray. Load the film onto the rods by turning the top
rod clockwise and the bottom rod counter- clockwise as you push the rods through. Make sure to leave
equal lengths of rod out of each end using the guide marks to correctly
position the roll of film
THREADING THE FILM
Read the threading card supplied with each roll of film carefully. Do not mistake the stabilizer bar for the
idler roller.
1. To thread the film through the “hot rollers” & “pull rollers”, please move the handle to the “1/4”
position to release pressure on all the rollers. User can slide down the lower idler bar along the slot for
easier installation.
2. Pass the film by the rollers and make sure the film is perfectly aligned at the top and bottom.
Note: Overlap will cause the top film to deposit adhesive on the hot rollers and pull rollers, so this
procedure is critical.
3. Make sure the film is correctly threaded based on the threading guide.