1. Raise the handle to starting position Slide
the punch edge guide using the red arrow to
set it on “Letter” or “Legal”.
2. After adjusting the punch edge guide
accordingly, insert the sheets to be punched.
Note: When punching thicker and rigid
materials such as vinyl, composition, pvc and
polypropylene covers, punch only (1) sheet at
a time.
3 Pull the handle to punch the sheets.
4. Raise the handle to remove the sheets.
5. Please make sure to discard punched
debris in the waste bin regularly. Punching
with a full waste bin will damage the
machine.
Punching
2
