5. Press the coil inserter roller switch to the ON
position then grasp the document and gently press
against the coil against the roller.
6. Use the handheld coil crimper pliers to crimp
the ends to keep the document from unbinding.
MACHINE OPERATION
1. Adjust depth margin to control how far or close
you want the holes to be in relation to the edge
of your document.
2. Adjust ruler guide according to the size of your
document & disengage pins that would punch off
the edge of the document by pulling them towards
you.
3. Pull punch handle downwards to punch holes
on the document then retract to original position.
4. Manually insert the coil into the first 4 or 5 holes
as shown. Do this for all holes for models without a
coil inserting roller (Procoil-53).
Remember to periodically check and empty the waste bin to help ensure uninterrupted use.
FEATURES
SET-UP
Reference the table above to determine the necessary coil diameter size based on sheet capacity. This may also be used
to select the correct depth margin setting by turning the depth margin control dial.
For safety reminders and other useful tips on the proper operation of your machine, please turn to the back page.
Punch Handle
Disengageable Pins
Waste Drawer
Coil Crimper Pliers
included
Coil Inserting RollerToggle Switch
(for Procoil -53Ei)
Coil Inserting Roller
Depth Margin Control
Ruler Guide
Paper Entrance
6.5
5
3.5
2.5
Depth Margin
220
190
155
120
110
95
85
70
55
40
20
Sheet Capacity
25.4mm
22mm
19mm
16mm
14.3mm
12.7mm
11mm
9.5mm
8.0mm
6.9mm
4.8mm
1"
7/8"
3/4"
5/8"
9/16"
1/2"
7/16"
3/8"
5/16"
1/4"
3/16"
Coil Diameter
SPECIFICATIONS
Binding Material
: Plastic Coil
Binding Capacity
: 25mm
Punching Capacity
: 20 sheets (20lb. paper)
Punching Length
: 11.7” (A4)
Punching Format
: Electric (Procoil-53Ei); Manual (Procoil-53)
Hole Pitch
: 6.35mm (4:1)
Hole Spec
: 4mm
Depth Margin
: 2.5 – 6.5mm
Punch Holes
: 53
Disengageable Pins
: 53
Power Supply
: 110V/60Hz
Machine Dimensions
: 18”x14250”x10”
Machine Weight
: 29lbs (13kgs)
Warranty
: 1 Year
