Tamco X5 1:5 Brushless Buggy, Инструкция по эксплуатации и каталог запасных частей

Страница: 9 / 16

Programmable Items List
Modes
(The italics texts in the above form are the default settings)
1 2 3 4 5 6 7 8 9
1. Running Mode
Forward Only
with Brake
Forward/Reverse
with Brake
Forward and
Reverse
2.Drag Brake Force 0% 5% 10% 20% 40% 60% 80% 100%
3.Low Voltage
Cut-Off Threshold
Non-Protection 2.6V/Cell 2.8V/Cell
3.0V
/Cell 3.2V
/Cell 3.4V
/Cell
4.Start Mode(Punch) Level1 Level2 Level3 Level4 Level5 Level6 Level7 Level8 Level9
5.Max Brake Force 25% 50% 75% 100%
6.Max Reverse Force 25% 50% 75% 100%
7.Initial Brake Force
= Drag Brake
Force
0% 20% 40%
8.Neutral Range 6% (Narrow) 9% (Normal) 12% (Wide)
9.Timing
(Only for sensorless
motor)
0.00 ° 3.75 ° 7.50 ° 11.25 ° 15.00 ° 18.75 ° 22.50° 26.25°
10.Over-heat Protection Enable Disable
11.Motor Rotation
Counter
Clockwise
Clockwise
12.Lipo Cells Note6 Auto Calculate 2 Cells 3 Cells 4 Cells 5 Cells 6 Cells
Programmable
Items
Advanced Items
Basic Items
Programmable Value
Note 6: Because the normal voltage of each Lipo cell varies from 2.6V to 4.2V, it is quite difficult to calculate the cells number of a discharged Lipo
battery pack. If it is calculated incorrectly, the Low Voltage Cutoff Protection function may work abnormally, so the option “Auto Calculate” is only
available for 2s, 4s and 6s Lipo. If the voltage of the battery pack is lower than 8.8V, it is judged as a 2s Lipo; If the voltage is between 8.8V to 17.6V, it
is judged as a 4s Lipo; If the voltage is higher than 17.6V, it is judged as a 6S Lipo. So in order to make the Low Voltage Cutoff Protection function
always works correctly, we strongly suggest setting the “Lipo Cells” item manually.