This unit is designed and manufactured with the user’s safety in mind, however any improper use or operation may result in
certain dangers. It is therefore highly recommended to read this manual thoroughly and adhere to the following precautions.
To prevent an electrical shock, do not open the housing of the unit. In any case of malfunctioning, only have the unit serviced
by an approved and qualified service centre.
Do not expose to any water or to a very humid environment. Do not operate the unit when your hands are wet as this may
cause a short circuit.
For safe driving, keep the volume low in order to concentrate on traffic conditions.
Do not clean the unit with alcohol, only clean with a soft dry cloth.
If the unit has been kept at a high temperature or in a high humidity environment, cool down the car interior before turning on
the unit.
Do not use the unit for a long time without running the vehicle engine, it may drain the battery and the vehicle engine may not
be able to start.
Before final installation in the dashboard opening, first connect the wiring and make sure the unit is working properly.
Only use parts provided with the unit to ensure proper installation.
Do not route wiring in places that the heat may melt the wiring insulation.
When replacing the fuse, ensure that the new fuse has the capacity recommended by the manufacturer.
Do not operate the player with scratched, bent or broken discs. When a disc is not loaded properly, do not force it into the
disc loader.
Never insert any other objects into the disc loader like a coin or pin, etc as this may cause damage or a short circuit.
Do not use different disc formats other than 12cm round discs.
If the unit is disconnected to the battery, it will lose memorized data.
If the source disc has poor sound quality due to scratches, dirt or a bad recording, the playback sound quality may be poor.
SAFETY PRECAUTIONS
OPERATION PRECAUTIONS
PRECAUTION
GB-3
