POWER SUPPLY
17.
FUNCTION
button
18. LCD display
19.
+10 TRACK
button
20.
-10 TRACK
button
21.
MODE FM/FM ST
switch
22.
TUNING
dial
23. Speakers
24.
AC
power cord
25. Speaker cable
26. FM antenna
27.
FOLDER DOWN
button
28.
MUTE
button
29. Infrared remote sensor
30.
SP R/L
speaker jacks
Using the AC power supply
Insert the AC power cord into an AC mains outlet with a 230V AC ~ 50Hz power source.
Installing the remote control battery
1. Remove the battery compartment cover on the bottom of the remote control.
2. Insert 2 1.5V AAA/LR03 batteries (not supplied) with the polarity matching the indication inside
the battery compartment cover.
3. Replace the battery compartment cover.
Note: The remote control battery normally lasts for about one year, although it depends on how often
and for what operations the remote control is used. If the remote control fails to work even when it is
operated near the unit, replace the battery.
Precautions when using batteries
1. Use only the size and type of batteries specified.
2. Do not mix different types of batteries together (e.g. alkaline, rechargeable and standard (carbon
zinc)) or old batteries with fresh ones.
3. Exhausted batteries must be removed to prevent any battery leakage.
4. Dispose of batteries properly according to environmental regulations.
BASIC OPERATION
Connect the speakers
Connect the speakers to the
SP R/L
on the main unit using the integrated cables.
ON/ Standby mode
Press the ON/STANDBY button to turn on the unit and press it again to go to standby mode.
Clock time setting
1. In standby mode, press and hold the
PROGRAM/CLOCK-ADJ
button and the message
“24 hour” will flash.
2. Press the / buttons to select the 24-hour or 12-hour display mode
and then press the
PROGRAM/CLOCK-ADJ
button to confirm.
The hour digits will flash.
3. Press the / buttons to set the hours.
4. Press the
PROGRAM/CLOCK-ADJ
button to confirm and the minute digits will flash.
5. Press the / buttons to set the minutes.
6. Press the
PROGRAM/CLOCK-ADJ
button again to confirm the time setting.
Selecting the source
When the unit is switched on, press the
FUNCTION
button repeatedly to select one of the following
sources: CD, USB, FM, AUX.
GB-3
CD1AUSB-TAM-GB-FM-TCD13.indd 4
7/3/2009 10:18:47 AM
