4
(a)
(b)
Fig. 2. FlySense AoA PRO should be mounted parallel to the main axes of the airplane.
1.2 Connection
FlySense AoA PRO is powered by two means:
•
Its internal battery, offering approximately one and half (1.5) hours of operation. Please
turn the battery-switch on for battery device operation.
•
The connections to the external DSUB25 connector are as in the below table:
•
PIN
CONNECTION
1
Main Power plus(+) (factory connected)
2
Autopilot
4
External USB(factory connected)
5
External USB(factory connected)
7
Horn red
8
External LED
9
temperature probe blue or yellow(factory connected)
10
GND
11
External Switch
12
External Switch
13
GND
21
temperature probe black (factory connected)
22
temperature probe red (factory connected)
24
Horn Black
25
Main Power Minus(-) (factory connected)
•
The device also connects to a fused connection for continuous power supply and battery
charging; such connection may be the cigarette lighter plug of the aircraft. Please note that
battery charges in this case regardless of the battery-switch position (on or off). Always
make sure to connect with the proper polarity:
The red cable connects to the positive pole (+)
The black cable connects to the negative pole (-)
