3
GB
2
GB
1.
Vacuum/Blower Tube
2.
Housing
3.
Vacuum/Blower Button
4.
Drive Shaft
5.
Vacuum Bag
SPECIFICATIONS
Max. Air Velocity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .195km/h
Max. Air Volume . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8.5cm/min
Bag Capacity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .35 Litre
Mulching Ration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8:1
Weight (Attachment) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1.5kg
GENERAL IDENTIFICATION
1
2
4
3
5
1. Avoid spilling the fuel when refueling.
2. Do not smoke while fueling the power unit.
3. Fuel the power unit in a well-ventilated area.
4. Move away from the fueling area when starting the
unit.
5. Do not wear rubber or other insulated gloves when
operating the unit to avoid static electricity shock.
6. Store in an area free of potential fuel vapor ignition
sources such as open flames (pilot lights) or electrical
sparking devices (switches electric motors).
7. Turn off the engine and let it cool before refueling or
before putting the unit in storage.
1. Do not use in rain.
2. Avoid dangerous environments, never operate power-
head in damp or wet conditions.
3. To reduce the risk of electric shock, do not expose the
unit to rain or operate powerhead on wet ground.
4. Always unplug the powerhead and allow it to cool
before putting it into storage. Store indoors.
5. Always unplug the unit when not in use, and before
performing any maintenance or repairs.
SAFETY WARNINGS FOR GAS BLOWER/VAC
SAFETY WARNINGS FOR ELECTRIC BLOWER/VAC
To install vacuum bag:
Connection Tube :
Align pins (A) and clips (B) on black
connection tube with grooves in main housing. Push con-
nection tube up as far as it will go rotate tube clockwise
firmly until it clicks into place. (Fig. 1)
Vacuum bag:
slide round opening at top of vacuum bag over connection
tube up to recessed area below grip. Use strap and buck-
le to secure bag tightely. (Fig. 2)
•
DRIVE SHAFT
Installing the lower shaft
1. Remove the cover from the lower shaft (A). Press the
release lever (B) while pushing the lower shaft into the
tool-link couping. (Fig. 3A)
2. Locate and lock the release lever into the primary hole
(C) in the shaft. (Fig. 3A)
3. Tighten the knob (D) securely clockwise before using
the unit. (Fig. 3B).
Bag attachment to shaft:
Secure bag strap around trimmer shaft tube or handle
(Fig.4)
• BLOWER OPERATIONS (Fig. 5)
Your Talon blower is designed to easily remove debris
from patios, walkways, lawns, bushes, etc., and many
hard to reach areas where debris may accumulate.
Before using your blower, review Safety Precautions in
your User Manual, and all regulations for operation of the
unit. These precautions and regulations are for your pro-
tection.
DO NOT
operate the blower with other people or animals
in the immediate vicinity. Allow a minimum of 30 feet (9
meters) between operator and other people or animals.
We recommend that a face mask be worn when operating
blower in dusty areas.
Stand away from the debris, at a distance that will easily
allow you to control the direction of blown debris. Never
blow debris in direction of bystanders.
To control velocity of airstream, blower can be operated at
any speed between idle and full throttle. Experience with
the unit will help you determine the amount of airflow nec-
essary for each application.
ASSEMBLY INSTRUCTIONS
Fig. 1
Fig. 2
A
B
A
Fig. 3A
Fig. 3B
C
D
Fig. 4
CAUTION
: Make sure the release lever is
locked in the primary hole and knob is securely
tightened before operating this unit.
CAUTION:
All attachments are designed to
be used in the primary hole unless otherwise
indicated in the specific attachment’s opera-
tor’s manual. If the incorrect hole is used, it
could result in injury, or damage to the unit.
OPERATING INSTRUCTIONS
Fig. 5
WARNING:
Because of flying debris, always
wear approved shielded safety glasses or
face shield when operating blower.
CAUTION:
Hold the blower so that hot
exhaust does not damage clothing and is not
inhaled by operator.
B
