TallyGenicom 9050N -, Руководство пользователя

Страница: 42 / 172

3-16 User Manual
Job Offset
Basic Printing Tasks
driver requested media type and paper size. If the default input tray does not contain the
requested media, the printer searches the other input trays to find one that has media matching
the requirements. If none is found, the printer stops and asks you to load the requested media in
the default input tray. You can acknowledge this by pressing Start whether the correct media is
in place or not. Or you can put the correct media in a tray and then use the Operator Panel to set
the media type for that tray. If it is Tray 1 or the size is not auto detectable, you can also set the
paper size. Otherwise, the printer can auto detect the paper size.
The most convenient way to enable this feature is by using your Printer Properties. You may
also enable this feature at the Operator Panel or by using the EWS.
To enable media check:
1.
Select the Paper Options button in the Paper tab within your Printer Properties.
The Paper Options window appears.
2. Select Media Check .
3. Click OK .
4. Click OK .
Job Offset
The Stacker Main and Standard Top Bin can place sheets in alternate positions to separate one
print job from another. This is called
job offsetting. When selected, the output position changes
after the final sheet of the print job is printed. The next job is the offset (shifted a bit) to keep it
separate from the previous print job.
The most convenient way to enable this feature is by using your Printer Properties. You may
also enable this feature at the Operator Panel or by using the EWS.
To turn job offset on through your Printer Properties:
1.
Select the Paper Options button in the Paper tab within your Printer Properties.
The Paper Options window appears.
2. Select Job Offset .
3. Click OK .
4. Click OK .
Saved Settings
As you create groups of settings in your Printer Properties, you can save that group of settings.
You can then select that group of settings by the name under which you saved them. This can
save you time and effort when printing
The most convenient way to enable this feature is by using your Printer Properties.