Tally T6218, Дополнение к руководству по обслуживанию

Страница: 23 / 55

Removing and Replacing Components
P/N 1149-084775 Tally Printer Corp. 23
Note: As you gently push on the “wedge”, reach underneath, grasping the
screws for the KEPS nuts of the left linear bearing, gently moving the
linear bearing left and right while sliding the “wedge” under the
bearing. As soon as the linear bearing no longer moves easily, STOP.
Install the hex KEPS nuts and tighten them while holding the lower left
linear bearing in place.