Tally T3016, Руководство по обслуживанию

Страница: 56 / 74

Paper Specifications
Single sheet Paper weight: 60 - 90 g/m
2
(For sheets with the paper weight beyond this range
a functional test should be performed)
Paper width: 100 - 369 mm
(format selection range)
Paper length: 100 - 356 mm
Storing conditions Temperature: + 18 °C to + 24 °C
Relative Humidity: 45% to 60%
Multilayer forms Multilayer forms can be used only with the glued edge on the top side of the form.
The glued edge should be possibly soft. Residual glue must not extrude from the
top edge. A curved glued edge may result in a desturbed paper transport.
Multiform sets must be placed into the insertion with the glued edge pointion
downward. They must be tested for proper operation.
Paper quality Suitable for your printer are paper qualities with a low amount of wood, medium
fine papers, as well as papers with a quality mark SM-post or copying papers.
Not suitable are satinated or color coated papers, art papers as well as papers
with relief print.
Check paper before your printer is taken into operation!
Sheet Feeder Mechanic Specifications
8-2