10
Insert paper support into slot of
extension plate until it stops.
11
If ON LINE indicator is not lit, press
ON LINE to get ready to print.
Single Sheets and Envelopes (Friction Mode)
1
Set paper feed selector to “ ”
position.
2
Raise top cover.
This is done by inserting the side pins of the top
cover into the slots in the upper cabinet.
3
Raise paper support.
4
➊
Separate paper guides to
approximate width of your paper or
envelope.
➋
Insert a sheet of paper through
paper guides.
The paper will be automatically loaded to the
first print line.
5
If ON LINE indicator is not lit, press
ON LINE to get ready to print.
Note:
•
If the extension plate is already installed, it
does not need to be removed.
Paper
feed
selector
Top cover
➋
➊
Paper
support
Extension plate
-5-
