z
When cut sheet is used, printer will eject paper from front automatically.
z
When continuous paper is used, printer will eject paper from rear automatically. If it is
necessary, you can press this key again and again to eject paper until paper is left the
print bar.
When the paper is on tear-off position, printer will eject paper to starting print position
.
3.2 Starting up function
Self checking
When the printer is power off, hold down the
【
Online
】
key and POWER switch at the
same time until restoration of the printhead is finished. Please load paper and then the
printer will start self-checking.
The printer will print the version number of the firmware first, and then print current
parameter setting and test needles. After then, the printer will printer the list of character
set.
Continuous paper with width of 10 inches is recommended as self-checking requires
whole printing width and many lines are printed.
Содержание 1330
Страница 1: ......
