Talley ATTIVO Скачать руководство пользователя страница 6

5

OPERATION BUTTONS

The operation buttons on the face of the power unit provide the following functions.

RUN/STOP

Press to invoke stand-by mode prior to running power unit. Press again to run power unit. 

Press and hold whilst power unit is running (and unlocked) to cease operation and return 

to stand-by mode. In battery operation the power unit will then power off after 1 minute of 

inactivity. If using mains power, switch off by disconnecting power cable from power unit or 

turning off mains power.

COMFORT CONTROL

The automatic default comfort setting is MEDIUM. However, if the patient 

prefers a firmer or softer cushion, increase or decrease the comfort control 

setting accordingly using the UP and DOWN arrow buttons (SOFT/MEDIUM/FIRM). The comfort 

setting is shown on the display screen. Check periodically to ensure patient support and comfort.

MUTE

Press to silence the sounder and to clear the message from the display screen. The 

MUTE button can also be used to force power-off in stand-by mode.

DATA

The information menu can be activated by pressing the DATA button for 5 or more 

seconds while pressing the RUN/STOP button, then releasing the RUN/STOP button 

while continuing to press the DATA button for a few seconds. Press the DATA button when 

ready to exit the information menu.

NB. Used for accessing information only, does not affect mode of operation.

UNLOCK / LIGHT

The power unit will automatically lock 1 minute after last button operation when 

running to prevent inadvertent operation of button functions (except MUTE), as 

indicated by ‘   ’ on the display screen. Press and hold the UNLOCK button until power unit 

beeps if further button operation is needed (i.e. change of comfort setting, or returning 

power unit to stand-by mode). The power unit will lock again 1 minute after last button 

operation. Pressing this button will also illuminate the display screen for 10 seconds if 

power unit is in battery operation (screen will always be illuminated in mains operation).

MAXIMUM USER WEIGHT GUIDELINES

127kg (20 stone) max.

Содержание ATTIVO













Отзывы: