Talley 2463T100-1, Техническое руководство

Страница: 36 / 353

TM5-4120-375-14
SECTION II.
SERVICE UPON RECEIPT
4-4.
UNLOADING THE EQUIPMENT.
The crated air conditioner may be unloaded and moved by any means, provided
the unit weight is supported by the base platform.
4-5.
UNPACKING THE EQUIPMENT.
CAUTION
So that the unit is protected,
it should be left crated until moved
to the location where it is to be installed.
a. General. To uncrate the unit, remove the bands from the top panel
and lift off the top.
Remove sides in a similar manner.
The unit is then ready for inspection.
b. Depreservation. Prepare the air conditioner for
inspection and
operation as outlined on DA Form
2258
(depreservation Guide for Vehicles and Equipment.
4-6. INSPECTING AND SERVICING EQUIPMENT.
a. Inspect the entire air conditioning unit, including motors, fans,
controls, etc.,
to be certain that all parts have been received and
without damage. Report any deficiencies to the proper maintenance
level.
CAUTION
Do not remove tags from equipment until the instructions have been
followed. Failure to follow these instructions can result in serious
damage to the equipment.
b. Test the joints in the refrigerant circuit for leaks in accordance
with paragraph
5-17.
4-2